Quick Release Awning Bracket Bundle - RTT Mount 2 x Pack
Fits the heaviest 180° and 270° awnings — including Outback, The Bush Company, Kings and Bushwakka.
What's In The Box
2× Quick Release Awning Brackets (RTT Mount)
2× Stainless Steel Push Pins
2× L Support Brackets for RTT
- Mounting Hardware (M8 Stainless Steel)
Specifications
Specifications
Quick-Release Brackets
- Construction: 5mm & 8mm 304 stainless steel
- 50kg Per Bracket Load Rating
- Dimensions: 170mm H x 100mm W x 70mm D
- Weight: 2.2kg per bracket
- Finish: Textured black powder coat
- Features: Push-pin release, padlock + lock-off bolt options
- Compatibility: Rooftop tents and RTT accessory rails
Delivery & Shipping
Pre Order — Ships Early october
Stock lands early October. Pre orders ship in the order they were placed, the day stock arrives, via Australia Post. Free shipping within Australia on this bundle.
Tracking details will be emailed or sent via SMS once your order is dispatched.
Quick Release Awning Bracket Bundle - RTT Mount 2 x Pack
SEE IT CLIP ON
BUILT TO BE EASY
On & Off In Seconds
Pull the pins and lift the awning away. Slide it back on when it's time to head off. No tools, no drama.
304 Stainless Construction
5mm and 8mm plate, rated to 50kg per bracket and finished in textured black powder coat.
Handles The Big 270s
Engineered for the heaviest 180° and 270° awnings — Outback, The Bush Company, Kings, Bushwakka and more.
Lockable For Travel
Lock-off bolt options keep your awning secured on the road and at camp.
Weekday Clean. Weekend Ready.
Leave the brackets mounted and run a clean setup all week. Your awning goes back on in seconds for the weekend.
Description
Description
PRE ORDER. Stock lands early October and ships the day it arrives. Order now to lock in the Father's Day price and free shipping. Buying it as a gift? The order confirmation makes a solid IOU, and he'll forgive you the moment it turns up.
Everything You Need to Mount an Awning to Your Rooftop Tent. Once.
Two quick release brackets, two push pins and two L Supports. Bolt them to your RTT one time, then clip your 270° or 180° awning on and off in seconds whenever you like. The awning stops being a permanent fixture and starts being gear you actually use.
What's in the box
- 2 x Heavy Duty Quick Release Awning Brackets (RTT Mount) rated to 50kg per bracket
- 2 x Quick Release Push Pins M8 stainless steel and aluminium
- 2 x L Support Brackets for RTT 5mm stainless steel
Save $77.95 compared to buying each piece separately, and shipping is on us.
Two brackets is the standard setup
Most 180° awnings and plenty of 270° awnings run on two mounting points. This pack gives you both, plus the L Supports that stiffen your tent's side rail right where the awning loads it. No flex, no rattle, no wondering if it's still there after the corrugations. Running a big 270°? Grab the 3 pack instead.
Mount once. Remove in seconds.
Slide the awning bracket into the mount, push the pin, done. Pull the pin and lift it off when you want to run light during the week. Two position height adjustment lets you dial in clearance, and the slots for padlocks or lock off bolts keep it secure when you're not around.
Built for the trip, not the showroom
- 5mm and 8mm stainless steel brackets, over engineered on purpose
- 5mm stainless L Supports
- Textured black powder coat that shrugs off salt, dust and UV
- Low profile when the awning is off, so nothing ugly sticks up from your tent
- Rated to 50kg per bracket
Fits
Rooftop tents with a side rail or extrusion, running 270° or 180° freestanding awnings. The L Supports are built for the Land Raxx quick release system and also work with other brands of awning brackets.
Who it's for
Dads who take the tent off for the school run and put it back on Friday arvo. Or dads who'd like to, if the awning weren't such a pain. Sorted before the summer trips start.
Pre order details
- Stock arrives early October 2026. Pre orders ship in the order they were placed, the day stock lands.
- Payment is taken at checkout. Father's Day pricing is locked in for pre orders.
- Free shipping within Australia.
WARRANTY
WARRANTY
What's Covered:
- Brackets (metal components) — 5-year warranty against structural defects or failure under normal use.
- Pins and fasteners — 12-month warranty.
- Powder coating — Not covered due to normal wear and exposure.
What Voids the Warranty:
This warranty will be void if:
- The brackets are misused, abused, or installed incorrectly.
- The brackets are modified in any way, including welding or retrofitting additional parts.
- The failure is due to third-party components (e.g. rooftop tent rails, bolts, awning side rails) that are not compatible or structurally adequate.
Important Installation & Usage Requirements:
To ensure safety and performance:
- Always verify that your rooftop tent or mounting platform is rated to handle the combined load of the brackets and awning. If unsure, check with your rooftop tent manufacturer.
- Use guy ropes and poles at all times when deploying an awning, even if it’s marketed as “freestanding.” Wind gusts can cause serious damage.
- Use only correct bolts or channel nuts that match the awning’s T-slot or mounting system. Incompatible hardware can cause failure.
Note: Our brackets are load-rated to 50kg per bracket, but your setup is only as strong as its weakest link.
Limitations of Liability:
Land Raxx accepts no responsibility for damage or failure caused by:
- Inadequate load ratings or construction of rooftop tents, rails, or awnings
- Environmental forces like wind, if the awning is not properly secured
- Failure to follow installation instructions or usage guidelines
Warranty Claims:
- Proof of purchase is required.
- If your claim is approved, Land Raxx will reimburse reasonable return shipping costs and provide a replacement or refund at our discretion.
- For support, contact us at info@landraxx.com or call our team.
MEASUREMENTS & SPECS
REVIEWS
Frequently Asked Questions
When will my pre order ship?
When will my pre order ship?
Australian stock lands early October 2026. US stock lands in our US warehouse late September. Pre orders ship in the order they were placed, the day stock arrives, and you'll get tracking by email or SMS the moment yours is on its way.
Are the brackets compatible with all rooftop tents?
Are the brackets compatible with all rooftop tents?
As long as your rooftop tent has two channels running along the bottom rail and the bottom rail is vertical (not on an angle), then our Quick-Release Brackets will fit your setup.
Are they compatible with my awning?
Are they compatible with my awning?
We’ve designed our brackets to be as universal as possible. They’ve been specifically engineered to handle the heaviest 180° and 270° awnings, including popular brands like Outback, The Bush Company, Kings, and Bushwakka. As long as your awning has a backing plate with two T-slot channels, our brackets will work for you.
What’s the weight load rating on them?
What’s the weight load rating on them?
The brackets have been over-engineered to handle the heaviest of awnings. Each bracket can take up to 50 kg. However, the ultimate load rating will depend on your rooftop tent’s side rail. Please check with your rooftop tent manufacturer for their load rating and adhere to their recommendations.
What are the brackets made from?
What are the brackets made from?
The brackets are made from 5mm and 8mm 304 stainless steel and powder-coated in a textured, hard-wearing black finish. All fasteners and push pins are made from stainless steel as well.
How many pins do I get when I order a set of brackets?
How many pins do I get when I order a set of brackets?
If you order two brackets, you’ll receive two push pins. If you order three, you’ll receive three push pins. If you’d like to run an extra set of push pins in the top holes instead of the 30mm stainless steel bolts we provide, additional sets are available for purchase here.
How do I know if I need two or three brackets?
How do I know if I need two or three brackets?
We generally recommend two brackets. However, a third bracket provides an extra point of support for both downward and upward forces — for example, a strong wind gust coming through your campsite. We also recommend three brackets if you’ll be doing any serious off-roading or driving long distances across corrugated roads.
Can I mount these to a roof platform or standard roof racks?
Can I mount these to a roof platform or standard roof racks?
These brackets have been specifically designed for mounting directly to a rooftop tent. However, we’ve designed a set of L-Brackets that allow these to be mounted to a roof platform, canopy, or roof racks. They’re available here.
