RTT Rain Gutter

The ultimate solution for keeping your camp dry.

Designed to bridge the gap between your 270° awning and rooftop tent, the RTT Rain Gutter keeps water flowing away from your setup. Built tough and made by hand on the Gold Coast, this is a must-have for rainy weekends away.

Why You’ll Want It

• Smart drainage – 2200mm long with a 50mm fall (380mm down to 280mm wide) so water flows one way.

• Versatile fit – kedar track edges slide straight into most sailtrack profiles found on 270° awnings.

• Future-ready – includes a 50mm velcro strip for our soon-to-be-released drain system to divert water completely away from camp.

• Fully reversible – fall can run either way to suit your setup.

• High-quality build – handmade from 610gsm black PVC here on the Gold Coast.

Bundle Options

• RTT Rain Gutter Only – keep it simple.

• Rain Gutter + Mount Kit – upgrade with three stainless steel rooftop tent mounting brackets and quick-snap tarp clips for a complete setup.

Specifications

• Material: 610gsm black PVC

• Length: 2200mm

• Width: 380mm → 280mm (50mm fall)

• Edges: Kedar track (fits standard sailtrack profile)

• End: 50mm velcro strip for drain system

• Handmade in Gold Coast, Australia

Perfect for anyone running a rooftop tent and 270° awning combo. Don’t let the rain ruin your camp, kit up with the RTT Rain Gutter today.

What's Covered:

• Brackets (metal components) — 5-year warranty against structural defects or failure under normal use.
• Pins and fasteners — 12-month warranty.
• Powder coating — Not covered due to normal wear and exposure.
  

What Voids the Warranty:

This warranty will be void if:

• The brackets are misused, abused, or installed incorrectly.
• The brackets are modified in any way, including welding or retrofitting additional parts.
• The failure is due to third-party components (e.g. rooftop tent rails, bolts, awning side rails) that are not compatible or structurally adequate.
  

Important Installation & Usage Requirements:

To ensure safety and performance:

• Always verify that your rooftop tent or mounting platform is rated to handle the combined load of the brackets and awning. If unsure, check with your rooftop tent manufacturer.
  
• Use guy ropes and poles at all times when deploying an awning, even if it’s marketed as “freestanding.” Wind gusts can cause serious damage.
  
• Use only correct bolts or channel nuts that match the awning’s T-slot or mounting system. Incompatible hardware can cause failure.
  

Note: Our brackets are load-rated to 50kg per bracket, but your setup is only as strong as its weakest link.

Limitations of Liability:

Land Raxx accepts no responsibility for damage or failure caused by:

• Inadequate load ratings or construction of rooftop tents, rails, or awnings
• Environmental forces like wind, if the awning is not properly secured
• Failure to follow installation instructions or usage guidelines
  

Warranty Claims:

• Proof of purchase is required.
• If your claim is approved, Land Raxx will reimburse reasonable return shipping costs and provide a replacement or refund at our discretion.
• For support, contact us at info@landraxx.com or call our team.