Quick Release Awning Bracket Bundle - L Brackets 2 x Pack

PRE ORDER. Stock lands early October and ships the day it arrives. Order now to lock in the Father's Day price and free shipping. Buying it as a gift? The order confirmation makes a solid IOU, and he'll forgive you the moment it turns up.

Mount Your Awning to Your Roof Platform Once. Then Clip It On and Off Forever.

Two quick release L brackets, two push pins and four tie down points. Bolt the brackets to your platform one time, then your 270° or 180° awning goes on and comes off in seconds. Awning off, the brackets sit just 65mm above the platform and the tie downs hold everything else down.

What's in the box

• 2 x Quick Release L Brackets rated to 50kg per bracket
• 2 x Quick Release Push Pins M8 stainless steel and aluminium
• 4 x Tie Down Points 3mm folded 304 stainless steel, M8 bolts and T nuts included

Save $72.90 compared to buying each piece separately, and shipping is on us.

Two brackets is the standard setup

Most 180° awnings and plenty of 270° awnings run on two mounting points. This pack gives you both, spaced along your platform to take the load properly. Running a big 270° or a heavy setup? Grab the 3 pack instead.

Mount once. Remove in seconds.

Slide the awning bracket into the mount, push the pin, done. Pull the pin and lift it off when you want to run light during the week. Two position height adjustment lets you clear canopy doors and gullwings, and the slots for padlocks or lock off bolts keep it secure when you walk away.

Tie downs that earn their spot

Four points, two each side or however you like to load. A slot for lash straps, a cut out that takes up to three ratchet hooks, and yes, each one is a bottle opener. Fully folded 3mm stainless, so they don't bend when the load shifts.

Built for the trip, not the showroom

• 5mm and 8mm stainless steel brackets, over engineered on purpose
• 3mm folded 304 stainless tie down points
• Textured black powder coat that shrugs off salt, dust and UV
• Just 65mm above the platform with the awning removed
• Rated to 50kg per bracket

Fits

Land Raxx Summit Platforms, Rhino Pioneer, Yakima, Front Runner and most other slatted roof platforms, running 270° or 180° freestanding awnings. Fasteners for Land Raxx platforms are included. Other platforms need channel fasteners to suit your rack, which we don't supply.

Pre order details

• Stock arrives early October 2026. Pre orders ship in the order they were placed, the day stock lands.
• Payment is taken at checkout. Father's Day pricing is locked in for pre orders.
• Free shipping within Australia.

What's Covered:

• Brackets (metal components) — 5-year warranty against structural defects or failure under normal use.
• Pins and fasteners — 12-month warranty.
• Powder coating — Not covered due to normal wear and exposure.
  

What Voids the Warranty:

This warranty will be void if:

• The brackets are misused, abused, or installed incorrectly.
• The brackets are modified in any way, including welding or retrofitting additional parts.
• The failure is due to third-party components (e.g. rooftop tent rails, bolts, awning side rails) that are not compatible or structurally adequate.
  

Important Installation & Usage Requirements:

To ensure safety and performance:

• Always verify that your rooftop tent or mounting platform is rated to handle the combined load of the brackets and awning. If unsure, check with your rooftop tent manufacturer.
  
• Use guy ropes and poles at all times when deploying an awning, even if it’s marketed as “freestanding.” Wind gusts can cause serious damage.
  
• Use only correct bolts or channel nuts that match the awning’s T-slot or mounting system. Incompatible hardware can cause failure.
  

Note: Our brackets are load-rated to 50kg per bracket, but your setup is only as strong as its weakest link.

Limitations of Liability:

Land Raxx accepts no responsibility for damage or failure caused by:

• Inadequate load ratings or construction of rooftop tents, rails, or awnings
• Environmental forces like wind, if the awning is not properly secured
• Failure to follow installation instructions or usage guidelines
  

Warranty Claims:

• Proof of purchase is required.
• If your claim is approved, Land Raxx will reimburse reasonable return shipping costs and provide a replacement or refund at our discretion.
• For support, contact us at info@landraxx.com or call our team.