Heavy-Duty Quick-Release Awning Brackets - RTT Mount

Q: What are the brackets made from?

The brackets are made from 5mm and 8mm 304 stainless steel and powder-coated in a textured, hard-wearing black finish . All fasteners and push pins are made from stainless steel as well.

Trusted on 2,000+ setups

$247.00 AUD

Tax included Shipping calculated at checkout.

Configuration

Two Brackets — Recommended Three Brackets — Best for Off-Road

V2 pre order. Ships late November

The new V2 Quick Release Awning Brackets land late November and pre orders ship first, in the order received. Same plate, same 50kg per bracket rating, with an integrated spring loaded indexing pin, an anti rattle thumb screw and a threaded hole for an anti tamper bolt.

Will It Fit?

Your rooftop tent needs:a vertical lower side rail with two mounting channels

Heavy-Duty Quick-Release Awning Brackets - RTT Mount image 4

Your awning needs:a rear backing plate with two horizontal T-slot channels

Fits the heaviest 180° and 270° awnings — including Outback, The Bush Company, Kings and Bushwakka.

Not sure? Send us a photo →

5 Year Warranty Structural warranty on every bracket

Easy Returns If it doesn't fit your rig

V2 Pre Order, Ships Late November New V2 brackets, pre orders ship first in order received

Australian Designed Tested for Australian conditions

SKU: QRAB-RTT-002

What's In The Box

V2 Quick Release Awning Brackets (RTT Mount), qty matches your configuration
No push pins needed with V2The V2 bracket has an integrated spring loaded indexing pin. V1 brackets shipping now from our US warehouse include stainless push pins, one per bracket.
M8 Stainless Steel Mounting HardwareFull set of hardware included for every bracket in your configuration

Specifications

Quick-Release Brackets

Construction: 5mm & 8mm 304 stainless steel
50kg Per Bracket Load Rating
Dimensions: 170mm H x 100mm W x 70mm D
Weight: 2.2kg per bracket
Finish: Textured black powder coat
Features: V2: integrated spring loaded indexing pin, anti rattle and anti tamper bolt options, no push pins needed
Compatibility: Rooftop tents and RTT accessory rails

Delivery & Shipping

V2 Pre Order, Ships Late November

The new V2 Quick Release Awning Brackets land late November and pre orders ship first, in the order received, via Australia Post. Your order will not ship before late November.

Order now to lock in your spot. Standard and Express available, calculated at checkout. Free shipping Australia wide on orders over AU$450.

Tracking details will be emailed or sent via SMS once your order is dispatched.

SEE IT CLIP ON

Why Quick-Release

BUILT TO BE EASY

On & Off In Seconds

Pull the pins and lift the awning away. Slide it back on when it's time to head off. No tools, no drama.

304 Stainless Construction

5mm and 8mm plate, rated to 50kg per bracket and finished in textured black powder coat.

Handles The Big 270s

Engineered for the heaviest 180° and 270° awnings — Outback, The Bush Company, Kings, Bushwakka and more.

Quick-release awning and rooftop tent deployed on a BT-50 at camp

Lockable For Travel

Lock-off bolt options keep your awning secured on the road and at camp.

Weekday Clean. Weekend Ready.

Leave the brackets mounted and run a clean setup all week. Your awning goes back on in seconds for the weekend.

Description

Land Raxx Heavy-Duty Quick-Release Rooftop Tent Awning Brackets

Rated to 50kg per Bracket

Simplify your adventure setup with the Land Raxx Heavy-Duty Quick-Release Awning Brackets designed specifically for rooftop tent mounting.

Engineered for strength, ease of use, and versatility, these brackets make attaching and removing your 270° or 180° freestanding awning faster and more convenient than ever.Built Tough for the Journey

Constructed from 5mm and 8mm stainless steel, these brackets are powder-coated in a hard-wearing black finish for maximum durability.

Designed to handle the toughest conditions, they ensure your awning is securely mounted whether you're off-roading, camping, or heading to your favourite remote spot.

Streamlined Design

Our low-profile design keeps things sleek and practical. When your awning is removed, these brackets sit cleanly and unobtrusively, making them perfect for adventurers who value both form and function.

Effortless Quick-Release System

Say goodbye to fiddling with bolts. With our push-pin quick-release mechanism, mounting and removing your awning is fast and fuss-free.

The two-position height adjustment offers flexibility to customise your setup, while additional holes and slots provide options for padlocks or lock-off bolts, ensuring your awning stays secure when it’s in place.

Precision Fit for Rooftop Tents

Designed specifically for mounting to rooftop tents, these brackets make it easy to secure your awning directly to your setup.

Whether you’re adding shade or creating the perfect campsite, these brackets are a game-changer for rooftop tent owners.

Game-Changing Features

5mm & 8mm Stainless Steel Construction: Over-engineered for strength and durability
Hard-Wearing Powder-Coated Finish: Built to withstand harsh conditions
Quick-Release Push Pin System: Simplifies installation and removal
Padlock & Lock-Off Bolt Options: Enhanced security for peace of mind
Sleek, Low-Profile Design: Practical and unobtrusive when the awning is removed

The Ultimate Rooftop Tent Accessory

Perfect for anyone looking to elevate their rooftop tent setup, these quick-release awning brackets are built for explorers who need gear that’s as reliable and adaptable as they are.

Upgrade your adventure setup today with the Land Raxx Heavy-Duty Quick-Release Rooftop Tent Awning Brackets—built tough to make every trip easier and more enjoyable.

WARRANTY

What's Covered:

Brackets (metal components) — 5-year warranty against structural defects or failure under normal use.
Pins and fasteners — 12-month warranty.
Powder coating — Not covered due to normal wear and exposure.

What Voids the Warranty:

This warranty will be void if:

The brackets are misused, abused, or installed incorrectly.
The brackets are modified in any way, including welding or retrofitting additional parts.
The failure is due to third-party components (e.g. rooftop tent rails, bolts, awning side rails) that are not compatible or structurally adequate.

Important Installation & Usage Requirements:

To ensure safety and performance:

Always verify that your rooftop tent or mounting platform is rated to handle the combined load of the brackets and awning. If unsure, check with your rooftop tent manufacturer.
Use guy ropes and poles at all times when deploying an awning, even if it’s marketed as “freestanding.” Wind gusts can cause serious damage.
Use only correct bolts or channel nuts that match the awning’s T-slot or mounting system. Incompatible hardware can cause failure.

Note: Our brackets are load-rated to 50kg per bracket, but your setup is only as strong as its weakest link.

Limitations of Liability:

Land Raxx accepts no responsibility for damage or failure caused by:

Inadequate load ratings or construction of rooftop tents, rails, or awnings
Environmental forces like wind, if the awning is not properly secured
Failure to follow installation instructions or usage guidelines

Warranty Claims:

Proof of purchase is required.
If your claim is approved, Land Raxx will reimburse reasonable return shipping costs and provide a replacement or refund at our discretion.
For support, contact us at info@landraxx.com or call our team.

MEASUREMENTS & SPECS

Quick-release awning bracket RTT mount dimensions — 170mm high, 100mm wide, 70mm deep

WEIGHT — 2.2 KG PER BRACKET

Height170 mm

Mount plate width100 mm

Awning plate width80 mm

Depth70 mm

Weight2.2 kg per bracket

Material5mm & 8mm 304 stainless steel

Load rating50kg per bracket

FinishTextured black powder coat

CUSTOMER SETUPS

1 3

REVIEWS

One of the best parts of my overland build!! Excellent design, excellent quality! Cannot say enough about how much I love these quick release awning mounts!

Appreciate the awesome feedback Christian! Nice setup!

Sturdy easy fit

Thanks for the review! Great to hear it was easy to fit and feels solid. Hope it serves you well on plenty of trips to come.

Heavy duty good quality product

Thanks for the review! Great to hear you’re happy with the quality. We put a lot of care into building gear that’s ready for the job.

Fitted yesterday. Looks good. A lot easier to manage,

Thanks, David! Great to hear you’ve got it fitted and it’s made things easier to manage. Enjoy the new setup!

These are great, super strong and pefect for my large 270 awning (Rugged4x4 2.5m 270)

Legend! Cheers, Richard! Great to hear the brackets are working well with your 270 awning. Hope you get plenty of use out of the setup!

Frequently Asked Questions

Are the brackets compatible with all rooftop tents?

As long as your rooftop tent has two channels running along the bottom rail and the bottom rail is vertical (not on an angle), then our Quick-Release Brackets will fit your setup.

Are they compatible with my awning?

We’ve designed our brackets to be as universal as possible. They’ve been specifically engineered to handle the heaviest 180° and 270° awnings, including popular brands like Outback, The Bush Company, Kings, and Bushwakka. As long as your awning has a backing plate with two T-slot channels, our brackets will work for you.

What’s the weight load rating on them?

The brackets have been over-engineered to handle the heaviest of awnings. Each bracket can take up to 50 kg. However, the ultimate load rating will depend on your rooftop tent’s side rail. Please check with your rooftop tent manufacturer for their load rating and adhere to their recommendations.

What are the brackets made from?

The brackets are made from 5mm and 8mm 304 stainless steel and powder-coated in a textured, hard-wearing black finish. All fasteners and push pins are made from stainless steel as well.

Do I need push pins?

Not with the V2 bracket. Every V2 Quick Release Awning Bracket has an integrated spring loaded indexing pin built in, so there are no loose push pins to fit or lose. The last V1 brackets shipping now from our US warehouse still use push pins, and those are included, one per bracket.

How do I know if I need two or three brackets?

We generally recommend two brackets. However, a third bracket provides an extra point of support for both downward and upward forces — for example, a strong wind gust coming through your campsite. We also recommend three brackets if you’ll be doing any serious off-roading or driving long distances across corrugated roads.

Can I mount these to a roof platform or standard roof racks?

These brackets have been specifically designed for mounting directly to a rooftop tent. However, we’ve designed a set of L-Brackets that allow these to be mounted to a roof platform, canopy, or roof racks. They’re available here.