Quick Release Bundle THREE - L Brackets & Quick Release

Quick-Release Awning + L Bracket Bundle

The most adaptable awning mount system in the game.

The freedom to mount anywhere, remove in seconds, and fine-tune your fit.

Whether you’re running a rooftop tent, roof platform, canopy, or roof racks — this bundle is built for Aussies who demand more from their 4WD setup. You’ll get our best-selling Quick-Release Awning Brackets (RTT Mount) paired with the new Land Raxx L Brackets, giving you total control over height, positioning, and modularity.

This setup is perfect for anyone who wants the flexibility to move their awning between vehicles, or dial in clearance for canopies with gullwing doors or awkward openings.

Built for fast deployment. Made to last.

We’ve engineered this combo with marine-grade stainless steel and a hard-wearing textured black powder coat that’s as tough as the tracks you drive.

Perfect for:

• Swapping your awning between your daily and your tourer

• Canopy setups needing height clearance for side-opening doors

• RTT + Awning combos that need flexible mounts without a full-time install

• Tradies or campers who want weekday practicality and weekend freedom

The Ultimate Rooftop Tent Accessory

Perfect for anyone looking to elevate their rooftop tent setup, these quick-release awning brackets are built for explorers who need gear that’s as reliable and adaptable as they are.

Upgrade your adventure setup today with the Land Raxx Heavy-Duty Quick-Release Rooftop Tent Awning Brackets—built tough to make every trip easier and more enjoyable.

The ultimate solution for keeping your camp dry.

Designed to bridge the gap between your 270° awning and rooftop tent, the RTT Rain Gutter keeps water flowing away from your setup. Built tough and made by hand on the Gold Coast, this is a must-have for rainy weekends away.

Why You’ll Want It

• Smart drainage – 2200mm long with a 50mm fall (380mm down to 280mm wide) so water flows one way.

• Versatile fit – kedar track edges slide straight into most sailtrack profiles found on 270° awnings.

• Future-ready – includes a 50mm velcro strip for our soon-to-be-released drain system to divert water completely away from camp.

• Fully reversible – fall can run either way to suit your setup.

• High-quality build – handmade from 610gsm black PVC here on the Gold Coast.

Bundle Options

• RTT Rain Gutter Only – keep it simple.

• Rain Gutter + Mount Kit – upgrade with three stainless steel rooftop tent mounting brackets and quick-snap tarp clips for a complete setup.

Specifications

• Material: 610gsm black PVC

• Length: 2200mm

• Width: 380mm → 280mm (50mm fall)

• Edges: Kedar track (fits standard sailtrack profile)

• End: 50mm velcro strip for drain system

• Handmade in Gold Coast, Australia

Perfect for anyone running a rooftop tent and 270° awning combo. Don’t let the rain ruin your camp, kit up with the RTT Rain Gutter today.

What's Covered:

• Brackets (metal components) — 5-year warranty against structural defects or failure under normal use.
• Pins and fasteners — 12-month warranty.
• Powder coating — Not covered due to normal wear and exposure.
  

What Voids the Warranty:

This warranty will be void if:

• The brackets are misused, abused, or installed incorrectly.
• The brackets are modified in any way, including welding or retrofitting additional parts.
• The failure is due to third-party components (e.g. rooftop tent rails, bolts, awning side rails) that are not compatible or structurally adequate.
  

Important Installation & Usage Requirements:

To ensure safety and performance:

• Always verify that your rooftop tent or mounting platform is rated to handle the combined load of the brackets and awning. If unsure, check with your rooftop tent manufacturer.
  
• Use guy ropes and poles at all times when deploying an awning, even if it’s marketed as “freestanding.” Wind gusts can cause serious damage.
  
• Use only correct bolts or channel nuts that match the awning’s T-slot or mounting system. Incompatible hardware can cause failure.
  

Note: Our brackets are load-rated to 50kg per bracket, but your setup is only as strong as its weakest link.

Limitations of Liability:

Land Raxx accepts no responsibility for damage or failure caused by:

• Inadequate load ratings or construction of rooftop tents, rails, or awnings
• Environmental forces like wind, if the awning is not properly secured
• Failure to follow installation instructions or usage guidelines
  

Warranty Claims:

• Proof of purchase is required.
• If your claim is approved, Land Raxx will reimburse reasonable return shipping costs and provide a replacement or refund at our discretion.
• For support, contact us at info@landraxx.com or call our team.